Gallery
D2D Accessories Customer Photo Gallery
D2D Cree 3.2" 40w led lighting kit wIth the Skene IQ-275 intelligent controller installed on a Suzuki by Team Moto Yamaha Nerang Queensland
 |
 |
|
D2D CREE 3.2" 35W LED Lighting Kit with the Skene IQ-275 Intelligent controller fitted to an R1200 GS WC |
 |
|
|
D2D Gen 7 Installation
|
1. Remove the OEM plug and rubber boot |
2. Remove the OEM bulb |
|
3. Unscrew the heat sink from the LED bulb |
4. Place the LED bulb into the housing |
 |
 |
| 5. lock down the retaining clip |
6. Replace the OEM rubber boot so that the LED bulb protrudes through the rubber boot |
 |
 |
|
7. Srew the heat sink back onto the bulb until
the boot is seated properly |
8. Plug the LED bulb into the voltage regulator and plug the regulator into OEM wiring loom.... That's it your done! |
 |
 |
D2D Gen 6 Installation
|
1. Remove the OEM plug and rubber boot |
2. Remove the OEM bulb by releasing the retaining clip |
 |
 |
|
3. Remove the locating collar from the LED bulb |
4. Place the locating collar into the housing |
 |
 |
| 5. lock down the retaining clip |
6. Replace the OEM rubber boot and insert the LED bulb |
|
 |
|
7. Insert the LED bulb in the 11:00 position and push home and turn to the 12:00 position and ensure the boot is seated properly |
8. Plug the LED bulb into the OEM wiring loom.... That's it your done! |
 |
 |
| Low beam pattern | High beam pattern |
 |
 |
This KTM 990 SMT is fitted with the D2D Gen 6 H4 LED Headlight bulb, the D2D 2" Cree Triple Intensity LED Lighting Kit with the Skene IQ-175 Intelligent Controller and the Photon Blaster with the optional Alert and Turn Signal Feature mounted on the hand guards.
|
Headlight at low beam and Spotlights set to 10% |
Headlight at high beam and Spotlights set to 100% |
These pictures are of the D2D H4 LED Bulbs fitted to a Honda Prelude
|
For comparison only one D2D H4 fitted (RHS) |
Fitted to the standard reflector with existing retainer |
|
With both D2D H4 LED bulbs fitted |
View at night on high beam |
This Triumph Sprint ST 955i is fitted with 2 D2D H4 LED Headlight replacement bulbs, Mondo Black driving lights and the Skene IQ-175 Intelligent Controller and the P3 rear visibility light system
|
Fitment |
Low beam with Mondo's set at 10% |
|
P3 Lights rear visibility lighting system Tail Light |
P3 Lights rear visibility lighting system Brake Light |
Mondo Chrome Cruiser Kit with the Skene IQ-175 Intelligent Controller on a 2010 Yamaha XVS
|
Mondo chrome cruiser lights at 20% |
Mondo chrome cruiser lights |
HB4/9005 LED PlugnPlay Bulb fitted to a 1996 Toyota Celica
|
HB4/9005 LED PlugnPlay Bulb |
White 55w Qi bulb |
|
HB4/9005 LED Bulb fitted to low beam |
Comparison between 3000 Lumen LEDs and 55w Qi bulbs |
P3 LIGHTS REAR VISIBILITY LIGHTING SYSTEM
| D2D Super Spot Kit on a KTM 990SMT |
 |
 |
|
Spots set at 10% brightness using the Skene IQ 275 Controller Supplied with the kit |
